News

FOUR PARMA12T FOR FRENCH POLYNESIA

We have just loaded four machines for French Polynesia, model Parma12T, each with a length of 4.6 meters, in a 40-foot container (12 meters). They fit perfectly, following the sketch of our technical office. This represents a saving per unit in transport, as it reduces the total cost. To achieve this, we dismantled the baskets and pivots of the lighting kit.

If you want information about this model, "CLICK HERE"

PARMA9 FOR FRANCE

We delivery MATILSA Parma9 to France. Battery operated and is black. Matilsa also customize colors if the customer needs it

If you want information about this model, "CLICK HERE"

AERIAL WORK PLATFORMS FOR NEW ZEALAND

We deliver 7 aerial work platforms to New Zealand, intended for rental. The machine chosen by our client has been the Parma12T model with 230V AC and DC battery power supply.

If you want information about this model, "CLICK HERE"

PARMA13E FOR THE PLADUR FACTORY IN GELSA

The Pladur company has acquired this Matilsa lifting platform, model Parma13E, for maintenance work at its plasterboard factory in Gelsa, Zaragoza.

If you want information about this model, "CLICK HERE"

AERIAL WORK PLATFORMS FOR HUNGARY

We delivered two aerial work platforms, model Parma13E, and an aerial work platform, model Parma16D, to Hungary.

If you want information about these models, "CLICK HERE"

PARMA12T FOR THE CZECH REPUBLIC

We delivered a towable lift, model Parma12T, to the Czech Republic.

If you want information about this model, "CLICK HERE"

FOUR PARMA12T FOR NORWAY

We have prepared four trailer lift platforms, model Parma12T, to deliver again to Norway.

If you want information about this model, "CLICK HERE"

PARMA15T FOR HUNGARY

We are carrying out the final tests of this towable platform, model Parma15T, to be delivered to Hungary..

If you want information about this model, "CLICK HERE"

THREE PARMA12 PLATFORMS FOR GERMANY

We have prepared three trailer lifts, model Parma12, to deliver to Germany.

If you want information about this model, "CLICK HERE"

SEVEN PARMA12T TRAILER MOUNTED PLATFORMS FOR LUXEMBOURG

We have seven trailer mounted platforms, Parma12T, ready to deliver in Luxembourg.

If you want information about this model, "CLICK HERE"

FOUR PARMA12T TRAILER MOUNTED PLATFORMS FOR SWEDENE

Four Parma12T bienergie & self Drive system ready to pick for Sweeden.

If you want information about this model, "CLICK HERE"

PARMA15T FOR FRANCE

Aerial work platform, model Parma12, for delivery in France.

If you want information about this model, "CLICK HERE"

PARMA15T FOR POLAND

We are loading a towable aerial work platform, model Parma15T, for delivery in Poland.

If you want information about this model, "CLICK HERE"

TWO PLATFORMS FOR BELGIUM

We have two lifting platforms, model Parma13E, ready to deliver in Belgium.

If you want information about this model, "CLICK HERE"

PARMA12T FOR THE CZECH REPUBLIC

We have delivered a trailer mounted aerial work platform, model Parma12T, to the Czech Republic.

If you want information about this model, "CLICK HERE"

TWO TOWABLE AERIAL PLATFORMS TO GERMANY

We deliver two towable aerial platforms, models Parma12T and Parma17, to Germany.

If you want information about these models, "CLICK HERE"

PARMA13E FOR LITHUANIA

We deliver a self-propelled aerial work platform, model Parma13E, for Lithuania.

If you want information about this model, "CLICK HERE"

TWO PARMA12T FOR BAURENT IN ROMANIA

We have delivered two trailer mounted aerial work platforms, Parma12T models, to the company BAURENT from Romania.

If you want information about this model, "CLICK HERE"

PARMA12 FOR THE ENDECO COMPANY

We have delivered a trailer mounted platform, model Parma12 with hydraulic stabilizers for maintenance services of the ENDECO company.

If you want information about this model, "CLICK HERE"

TRAILER MOUNTED PLATFORMS FOR THE KSM COMPANY IN ROMANIA

We delivered two trailer mounted platforms, models Parma12 and Parma15, to the KSM company from Romania. Models with stabilizers manual and proportional hydraulic controls. They are basic, simple and competitively priced platforms.

If you want information about this model, "CLICK HERE"

PARMA12T FOR GENERACIONES FOTOVOLTAICAS

We have delivered a trailer mounted platform, model Parma12T to Castilla-La Mancha, for the GENERACIONES FOTOVOLTAICAS company.

If you want information about this model, "CLICK HERE"

PARMA13E FOR LITHUANIA

We are doing the final test of this self-propelled aerial platform, model Parma13E with batteries, to be delivered in Lithuania.

If you want information about this model, "CLICK HERE"

PARMA12T FOR SWITZERLAND

Trailer mounted platform, model Parma12T, with color customization, automotive system and 230V power supply plus internal combustion engine, in the assembly process to delivery to Switzerland.

If you want information about this model, "CLICK HERE"

PARMA9 FOR GRAN CANARIA

We have prepared this towable lifting platform, model Parma9, to send to Gran Canaria.

If you want information about this model, "CLICK HERE"

PARMA17 FOR FRANCE

We have manufactured this trailer mounted aerial work platform, model Parma17, battery powered, to delivery to France.

If you want information about this model, "CLICK HERE"

PARMA17 FOR ROMANIA

Trailer mounted aerial work platform model Parma17 with electric supply and Honda engine ready for delivery to Romania.

If you want information about this model, "CLICK HERE"

PLATFORMS FOR ROMANIA

We have delivered two Parma17 aerial platforms to Romania.

If you want information about this model, "CLICK HERE"

TRAILER WITH MATILSA PLATFORMS

We have delivery a trailer loaded with six trailer mounted aerial work platforms to send to Sweden.

If you want information about these models, "CLICK HERE"

PARMA12T, TRAILER MOUNTED AERIAL WORK PLATFORM FOR SWITZERLAND

We have manufactured a Parma12T, trailer mounted aerial work platform, customized in yellow, to be shipped to Switzerland.

If you want information about this model, "CLICK HERE"

PARMA9, TRAILER MOUNTED AERIAL WORK PLATFORM FOR AIR BASE

We have manufactured a trailer mounted aerial work platform model Parma9 with an explosion engine for the Getafe air base, in Madrid.

If you want information about this model, "CLICK HERE"

TRAILER WORK PLATFORM FOR FRANCE

We have delivered a Parma12T, trailer mounted aerial work platform, to France, with batteries, Honda engine and self drive system.

If you want information about this model, "CLICK HERE"

AERIAL WORK PLATFORM PARMA16D

CONDACA companyies job is concrete projection. Model Parma16D 4x4x4 and equipped with hydraulic stabilizers was the only machine could make this job becasue the unlevel groun inside a tunel for the construction of a hiaghway in Fuerteventura. This hydraulic stabilizers are next to the wheels so it doesn´t need more space than the wide of the wheels.

If you want information about this model, "CLICK HERE"

TRAILER WORK PLATFORMS FOR RUSSIA

We have ready a couple of Parma12T and one Parma9 to send to Russia.

If you want information about these models, "CLICK HERE"

TRAILER WORK PLATFORM PARMA17

Trailer mounted aerial work platform articulated telescopic with 90º jib, for working heights up to 17 meter (55,77 feet). It weights 2.400 kg (5.291 lb). Monophasic 230V. Standard version equipped with hydraulic stabilizers.

If you want information about this model, "CLICK HERE"

TWO TRAILER WORK PLATFORMS FOR ISRAEL

We have two towable aerial platforms, model Parma12T, in assembly to be shipped to Israel. For these two units and future models we are developing the self-leveling system for towable platforms.

If you want information about this model, "CLICK HERE"

TWO TRAILER WORK PLATFORMS FOR FRANCE

We have prepared two towable aerial platforms model Parma12 with batteries and manual stabilizers to deliver to France.

If you want information about this model, "CLICK HERE"

NEW DISTRIBUTOR FOR MATILSA IN CHILE

BRYO, a new distributor of MATILSA in Chile. This company specializes in construction machinery and has incorporated our towable platform models into its marketing portfolio.

TWO TRAILER WORK PLATFORMS FOR AUSTRIA

Delivery of two Parma9 trailer work platforms for the austrian rental company Alpenlift.

If you want information about this model, "CLICK HERE"

FOUR TRAILER WORK PLATFORMS FOR NORWAY

Delivery of four Parma12T trailer work platforms for the norwegian rental company Hamar Liftsenter.

If you want information about this model, "CLICK HERE"

THREE TRAILER WORK PLATFORMS FOR GERMANY

Delivery of three Parma9 trailer work platforms for the German rental company Arbeitsbühnen Buchtmann GmbH.

If you want information about this model, "CLICK HERE"

AERIAL WORK PLATFORMS FOR ROMANIA

We delivery four aerial work platforms model Parma12T for Romania.

If you want information about this model, "CLICK HERE"

SCISSOR LIFT AERIAL WORK PLATFORMS

We have sold two scissor lifts of 8 and 12 meters. for KSM, our distributor in Romania and Hungary.

If you want information about these models, "CLICK HERE"

AERIAL WORK PLATFORMS MATILSA PARMA21D

We have deliver two aerial work platforms model Parma21D to Norway.

If you want information about this model, "CLICK HERE"

TRAILER MOUNTED AERIAL WORK PLATFORMS

In our factory, we are assembling towable lifts for delivery in Norway and Sweden.

If you want information about these models, "CLICK HERE"

TOWING PLATFORM MATILSA MODEL PARMA12T

We have deliver a towing platform model Parma12T for our client TRASEK of Czechoslovakia.

If you want information about this model, "CLICK HERE"

TOWING PLATFORM MATILSA MODEL PARMA15

We have deliver a towing platform model Parma15 for our client TSJ of Lithuania.

If you want information about this model, "CLICK HERE"

TOWING PLATFORM MATILSA MODEL PARMA12

MATILSA delivers four towing lifts model Parma12 to the Norwegian company Hamar.

If you want information about this model, "CLICK HERE"

TOWING PLATFORM MATILSA MODEL PARMA12T

Arabsat, founded in 1976 by the 21 member states of the Arab League, has addressed the growing needs of the Arab world for more than 40 years, operating from its headquarters in Riyadh-KSA and two satellite control stations in Riyadh and Tunisia. This company has relied on our lifting platforms for the maintenance of its satellite stations.

If you want information about this model, "CLICK HERE"

TOWING PLATFORM MATILSA MODEL PARMA12T

MATILSA´s dealer in Norway, is going to recive 10 units Parma12T, battery operated and self drive system

If you want information about this model, "CLICK HERE"

TOWING PLATFORM MATILSA MODEL PARMA9

Towing platform MATILSA model Parma9 sold to Paints José Antonio Lavado from Badajoz (Spain). It is a model for work at heights up to 9.5 meters and 675 kg weight. Two possible sources of power (220V or batteries). Approved for one person.

If you want information about this model, "CLICK HERE"

MATILSA DELIVERS TWO AERIAL WORK PLATFORMS IN POLAND

We have delivered two towing lifts, models Parma 12 and Parma 12T to our distributor in Poland, the Euro Truck Polska company.

If you want information about these models, "CLICK HERE"

MATILSA DELIVERS A PARMA 9 IN FRANCE

The Client Funder Christian of the town of Pruniers in France, sends us a photo of the Parma 9 model recently received. We are pleased to be able to contribute to the manufacture of equipment that will enable us to work safely in work with heights. If you want information from the model Parma 9 "CLICK HERE"

MATILSA DELIVERS A PARMA 9 TO COMLAND IN ZAGREB

MATILSA DELIVERS A PARMA 15T TO SERVIGRUE IN FRANCE

MATILSA DELIVERS A PARMA 15T

MATILSA DELIVERS A PARMA1261PV

TRAILER MOUNTED AERIAL WORK PLATFORM PARMA12T

Twelve units of model Parma12T for Norway and Sweeden in the assembly line.

MATILSA DELIVERS A PARMA 9 TO MONTAJES ELECTRICOS BORJA

MATILSA DELIVERS PARMA 9 TO GRUAS HOMANSER

NEWS ON VERTIKAL MAGAZINE

https://www.vertikal.net/en/news/story/26920/

NEW MODEL MATILSA PV1361

OTHER COMPANIES COPY MATILSA

Other companies copy MATILSA´s self propelled booms with stabilizers.

MATILSA IN MATELEC

MATILSA SENDS FIVE PLATFORMS LIFTS TO GERMANY

This week will be send to our distributor in Germany five aerial work platforms, two Parma15T and three Parma12T, customized in different colors. Trailer models with articulated and telescopic booms. They have three possible power supplies (AC 220V, 24V battery or internal combustion engine). The standard version is equipped with hydraulic outriggers, 230V, aluminium basket and full proportional controls.

MATILSA IN RUSSIA

SUKOI is an important aeronautic company from Russia. They are using a Parma13E from MATILSA to assebmly and maintenance. It is a self propelled battery work platform up to 13,2 m working heigh. It is a very appropiated machine to work insides with 1,5 meter wide and almost 7 meter out reach.